Product Overview
Paragon Pearl 18 Kiln
The Pearl18 is packed with exciting features. The top lifts away to give access to the shelf area from three sides. Air pistons assist in lifting the top. Even though we sell optional stands, you can place the Pearl on a table without an extra stand.
You can compose directly on the kiln shelf, then close the kiln top. There is no need to balance and carry a heavy kiln shelf from your work table over to your kiln, trying to load the shelf in the kiln while not disturbing the glass pieces in your design.
Heating elements in the top of the kiln are mounted in pinless grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins.
Key Features
- ¼" heavy duty sheathed Type-K thermocouple
- Sentry Xpress digital controller
- Safety switch and pilot light
- Air pistons assist lifting the lid.
- Louvered switch box, heavy duty wiring
- Includes a built-in stand.
Electrical components are mounted inside the base of the kilns. The Pearl-18 uses the digital 3-key Sentry Xpress controller.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Recommended furniture kit for the Paragon Pearl-18 and equivalent sized kilns.
Included:
1 - C-19 Shelf (17” square x 5/8”)
4 – 1/2” long, 1” wide Square Posts
1 lb. Bag Glass Separator
Product Specifications
Warranty Information
Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the periods specified below. The warranty period begins from the date of shipment from the Paragon factory unless the date of the original purchase from an authorized Paragon distributor or dealer can be established.
