Product Overview
Paragon Fusion-10 Glass Fusing Kiln
The 10-sided Fusion-10 will open a world of creativity for you. Fire silk-screening on glass, fire decals, paint with frit and stringers, fuse recycled bottles. Experiment with glass weaving. Make loads of glass pendants.
Even Heat Distribution from the Top and Sides
The Fusion-10 firebrick lid heating elements are seated in pinless grooves. A sidewall element, which is protected in recessed firebrick wall grooves, adds to temperature uniformity.
The standard insulating firebrick top on the Fusion-10 can be upgraded to the optional deluxe ceramic fiber top. The fiber top is noted for keeping the kiln interior especially clean. Both tops have the same pinless element grooves.
The Optional Furniture Kit
Recommended furniture kit for the Paragon Fusion-10, GF-10BD, and equivalent sized kilns includes:
1 C-22 Shelf (21” round x 3/4”)
4 – 1/2” long, 1” wide Square Posts
1 lb. Bag Glass Separator
Optional Glass Window
Many people consider the optional high temperature glass 1” x 3” window to be indispensable. You can watch every stage of fusing and slumping, from softening, to tack fuse, to full fuse, through the window at your convenience. By watching the glass, even beginners can fine-tune a digital program for precise results. When you see the glass fuse like you had envisioned, write down the temperature displayed on the controller for future firings. (Always wear firing safety glasses while watching the glass through the window. We recommend green #3 glasses.)
Dual Mechanical Relays
The Fusion-10 has dual mechanical relays for extra reliability. They send power to the elements on signal from the digital controller. Two relays last longer than the single relay of some competitive kilns because less amperage goes through each relay.
Optional Deluxe Mercury Relays
Order your new kiln with the quiet, reliable mercury relay instead of the standard mechanical relays. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays far outlast the standard mechanical relays and are optional on new kilns.
Sheathed Thermocouple
The thermocouple senses temperature inside the kiln. The Fusion-10 comes with the ¼” Type-K, which is hermetically sealed in a high-nickel metal sheath for long life.
Detailed Instruction Manuals
Included with your kiln is a 28-page controller instruction manual, a quick start programming guide, a 48-page glass manual, and blank firing record sheets. The manuals have been painstakingly researched and are written in plain English, printed in two colors, and are fully illustrated.
Designed for productionParagon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period. |
Optional colors at no extra chargeBrighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise. |
|
|
Recommended furniture kit for the Paragon Fusion-10, GF-10BD, and equivalent sized kilns.
Included:
1 C-22 Shelf (21” round x 3/4”)
4 – 1/2” long, 1” wide Square Posts
1 lb. Bag Glass Separator
Product Specifications
Warranty Information
Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the periods specified below. The warranty period begins from the date of shipment from the Paragon factory unless the date of the original purchase from an authorized Paragon distributor or dealer can be established.