Product Overview
Studio Pro 41 (Studio Size)
Studio Pro models feature our Dual Access Design. The Dual Access Design combines traditional front and top loading features into one, truly revolutionary kiln design. The Studio Pro Series gives you the advantages of both front and top access in a single, dual hinged design that's smooth and precise.
Our large Studio Pro Series models are used by both private studios and commercial operations and are capable of slumping, draping, fusing, painting and casting.
The Studio Pro's are available in a variety of control choice options as well as the solid state output option (which you want).
The Studio Pro 41 is our largest Studio Pro design. As with all of our Studio Pro models it combines the speed of a fiber lid with the natural slow-cooling and structural strength of firebrick. The best of both worlds, expertly combined, to offer the artist the largest possible firing surface with the performance Evenheat is known for.
We recommend ordering yours with the TAP touchscreen control and solid state relays for the ultimate in performance and long life.
The Studio Pro 41 is the finest studio and small commercial glass kiln!
- Chamber 25.25" Long x 40.5" Wide x 13.5" Deep
- 240V, 45A, 10,600W
- 1800°F Maximum Temperature
- 365lbs shipping weight
Studio Pro 41 Furniture Kit
Furniture kit recommended for use with Evenheat models Studio Pro 41 and GTS 41.
Furniture Kit includes:
- One (1) 39.3" x 24" Seamless Shelf
- Twelve (12) 1/2" High Posts. All posts 1" square.
- One (1) 5" Post (included for venting purposes)
- One (1) Haik Brush
- One (1) 24oz. Glass Separator
Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.
Additional freight charges may apply on this item.
We will contact you regarding any additional charges before shipping.
Features
Shown with Optional Casters and Shelves
Front Access
The defining feature of the Studio Pro design is its front access. Simply lift the chamber to expose the entire floor. It's wall-free and wide open.
Front access is perfect for glass placement: simply build directly on your shelf and close the chamber. Front access is also great when using tools that require a horizontal approach such as raking, roll ups and manipulation techniques.
Top Access
The Studio Pro 41 features top access as part of the dual access design.
Top access is excellent for the loading of shelves and forms as it allows for easy and precise placement. Top access is also preferred for many vertical-approach manipulation techniques such as embossing.
Top access also makes venting possible with the two position vent (see below).
Perfect Controller Location
Our TAP and Icon+ controls are positioned front-and-center at body level. Just walk up and enjoy.
Absolutely perfect.
Control location was the top priority for the Studio Pro design and we're pleased to offer it.
Swing View Equipped
TAP and Icon+ temperature controls are fitted to our Swing View Adjustable Enclosure.
The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle. Once you're done, lay it back down to see it from across the studio. It's that simple.
The swing view pairs well with touchscreen controls like the TAP and Icon+ as viewing angle can be perfectly aligned. You'll love it.
Evenheat Control Center
The Studio Pro 41 places all power components off and away from the kiln chamber and re-locates them to a control center on the back of the kiln base.
This thoughtful design locates critical power components away from chamber heat and keeps them low, cool and out of the way. The control center concept is a well-needed departure from traditional kiln designs.
Quiet Drive Solid State
The Studio Pro 41 is standard equipped with our Quiet Drive solid state relay system.
Our Quiet Drive solid state system delivers tight temperature control, long life and desired heating element response. The Quiet Drive is arguably the best designed and best performing solid state system on the market.
2 Position Lid Vent
The Studio Pro 41 is equipped with a 2 position lid vent.
The lower vent position props the lid by about an inch. Perfect for venting off adhesives and other low temperature binding materials.
The upper vent position props the lid by about 4 inches. Perfect for speeding up the cooling process.
Fiber Lid Construction
The lid of the Studio Pro 41 is constructed of a fiber material that provides excellent thermal properties along with light weight. This design allows the heating elements to be positioned on the surface for maximum heat transfer and firing efficiency.
​The fiber chosen for the lid is an extremely low-shot material. The surface is then covered with a no-shot fiber sheet. These two materials combine to create a lighter weight lid while severely limiting debris from the lid falling onto the glass. Very nice.
Maintenance Parts Tag
To assist you in replacing worn items we have included a maintenance parts tag on the Studio Pro 41 indicating the proper Evenheat part numbers for anticipated maintenance items.
Wish we had this decades ago.
Lift Assisted
To assist in chamber opening the Studio Pro 41 includes a spring lift assist feature. This well designed mechanism travels cleanly and securely and causes the chamber to rest easily in the open position.
​In the heat of battle you need a smooth and anxious-free movement and the Studio Pro 41 spring lift assist delivers.
Power Interrupt Switch Equipped
The Studio Pro 41 is standard equipped with a power interrupt switch which removes electrical power from all heating elements if either the lid or chamber is opened.
This is important for those who may access the kiln during firing such as glass manipulation and roll-ups.
Build Options
TAP or Icon+ Controls Option
The Studio Pro 41 is available with your choice of the TAP or Icon+ temperature controllers.
Both the TAP and Icon+ are touchscreen style and offer full programming functions.
​Check out our Controls tab for detailed descriptions of both controls.
Rolling Option
The Studio Pro 41 is easily made mobile with our rolling option.
The Studio Pro 41 base is equipped to accept our casters. No frame or extra hardware required. Simply attach the casters to the standard base and you're ready to go!
Casters are not factory installed. You will install them when you first set up your kiln. It's designed to be easy and it is. They can always be added later as well.
Voltage Options
Our default production for the Studio Pro 41 is 240V, Single Phase.
We do offer to build in 200V, 208V, 220V, 230V, 380V, 400V and 415V by request.
​All controls available on the Studio Pro 41 models will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.
​Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.
Voltage Phase Options
The Studio Pro 41 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.
Product Specifications
- Chamber Dimensions:
- 25.25" L x 40.5" W x 13.5" D - 7.52 Cubic Feet (64.1cm L x 102.9cm W x 34.3cm D - 213L)
- Outside Dimensions:
- 35.5" L x 45.5" W x 37" H (90cm D x 115.5cm W x 94cm H)
- Maximum Use Temperature:
- 1800°F (982°C)
- Standard Electrical:
- 240 Volts, 45 Amps, 10,800 Watts, 50/60Hz, Single Phase Power Cord Plug Configuration - NEMA 6-50
- Optional:
- Available in 200V, 208V, 220V and 230V by request Available in 3 phase Delta and Wye (380V, 400V, 415V) by request Operates properly on both 50Hz and 60Hz
Warranty Information
Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.
