Product Overview
RM II 2922 (Studio Size)
The RM II studio size models are the workhorses of ceramic studios, educational programs and production operations. Sizes range from shallow/easy to load all the way up to deep/full volume.
All RM II studio size models are equipped with our Swing View control enclosure that allows the artist to swivel the controls up to a very comfortable programming and use angle. There's no need to get on your knees when you have Evenheat's Swing View!
Add to that our TAP or Genesis touchscreen controls along with solid state relays and you have a kiln that is designed to not only be easy, but to be a great performer and long lasting.
The RM II 2922 offers the ceramic artist the volume of a standard studio kiln (7 to 8 cubic feet) with an easy to load 22" depth. It also offers a "studio standard" 50A electrical plug: no need for special direct wire connections!. It's a great kiln for so many reasons, you'll love it.
All RM II models selected with TAP, Rampmaster or Genesis controls are standard equipped with our Swing View pivoting control enclosure for easy use and viewing.
Equipped with our TAP Touchscreen, Genesis Touchscreen or Rampmaster II controls the RM II 2922 offers easy and straight forward operation. Order yours with our Quiet Drive Solid State output option for tight temperature control and longer element life.
Available in 220V and 230V by request
Available in 3 phase Delta and Wye (380V, 400V, 415V) by request
- Chamber 29" Diameter x 22.25" Deep
- 240V, 44A, 10,560W
- 2300°F Maximum Temperature
- 290lbs shipping weight
Orton VentMaster
With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are
pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the
outside through a duct. Improved air flow in the kiln results in more uniform
temperatures, reducing hot and cold spots.
Kilns cool faster when properly vented. In some cases, the kiln can cool down up to
four hours faster, meaning you can empty and refill the kiln in less time.
Downdraft venting can also extend the life of the metallic parts of your kiln by removing
corrosive fumes. This means longer kiln life and reduced repair costs.
So Why Vent Your Kiln?
• Fume Removal Improves Firings
• Extend the Life of Kiln Elements
• Cool Your Kiln Faster
• Improve Temperature Uniformity
Dyna-Lift Lid Assist
The Dyna-Lift lightens the force needed to operate the kiln lid. It does so with ease and grace and with no negative effects upon the kiln itself.
Hallmarks of the design include no kiln body connection, single point lifting and emphasis on allowing the lid to act naturally.
The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.
Super1 Furniture Kit
Furniture kit recommended for use with Evenheat models RM II 2922, HF 2918, DeLuxe 10 2918 and 2918.
This kit can also be used with any kiln brand and model with a minimum diameter of 28".
Furniture Kit includes:
- Four (4) 26" Half Shelves
- Eight (8) each of 1", 2", 3", 4", 5" and 6" Posts. All posts 1-1/2" square.
- One (1) Haik Brush
- One (1) 1lb. Kiln Wash
Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.
Additional freight charges may apply on this item.
We will contact you regarding any additional charges before shipping.
Product Specifications
Warranty Information
Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.
