Product Overview
High Fire 2927 (Studio Size)
The High Fire studio size models are large and powerful enough for cone 10 daily. Sizes range from easy to load like the HF 2918 all the way up to the large volume HF 2927.
All High Fire studio size models are standard equipped with our patented Dyna-Lift lid lift system and our Swing View control enclosure. The Swing View allows the artist to swivel the controls up to a very comfortable programming and use angle.
Add to that our TAP or Genesis touchscreen controls along with solid state relays and you have a kiln that is designed to not only be easy but to be a great performer and long-lasting.
All High Fire models operate with multi-zone control for accurate and repeatable performance.
All High Fire models are equipped with our Swing View control enclosure for "stand-up" programming as well as multiple control choices including the TAP and Genesis touchscreens. Order yours with our solid state relays and never replace a relay again.
Built for large working studios, production houses and centers of learning the HF 2927 delivers on size, features and performance.
2 Position Lid Vent
The HF 2927 is equipped with a 2 position lid vent. Perfect for speeding up the cooling process.
Lid Lift Assist
To assist in opening and closing we have equipped the HF 2927 with our patented Dyna-Lift lid lift assist.​
The Dyna-Lift lightens the force needed to operate the kiln lid by attaching and lifting at a single point, the lid handle. The lift assist is not attached to the kiln chamber at all. All heavy lifting forces are directed entirely to the kiln stand and not the kiln itself. It's a wonderful design that places no lifting forces onto the chamber which would only weaken it.
The Dyna-Lift Lid Lift Assist is the best designed, best performing lift assist available.
Lid Prop
The HF 2927 is provided with lid prop bars that positively keeps the lid in the open position. Simple operation is made even easier with our well designed lid handle.
Swing-Away Peephole Covers
Our kiln designs feature swing-away peephole covers as opposed to plugs.
Plugs get lost and they get broken. Our attached peephole covers remain on the kiln and simply swing open and closed. You won't lose them and they certainly won't break
Equipped with our TAP Touchscreen, Genesis Touchscreen or Rampmaster II controls the HF 2927 offers easy and straight forward programming.
All High Fire models selected with TAP, Rampmaster or Genesis controls are standard equipped with our Swing View pivoting control enclosure for easy use and viewing.
Order yours with our Quiet Drive Solid State output option for tight temperature control and longer element life.
Production for the HF 2927 is 240V.
​
We do offer to build in 200V, 208V, 220V, 230V, 380V, 400V and 415V by request.
The HF 2927 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.
All controls available on the HF 2927 will operate properly on both 50Hz and 60Hz line frequencies. To say it another way, line frequency has no effect. It doesn't matter.
​
Evenheat recommends that you check your operating voltage before ordering or placing the kiln in service.
The HF 2927 is standard equipped with our Patented Dyna-Lift lid lift assist.
- Chamber 29" Diameter x 27" Deep
- 240V, 59A, 14,164W
- 2350°F Maximum Temperature
- 430lbs shipping weight
Orton VentMaster
With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are
pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the
outside through a duct. Improved air flow in the kiln results in more uniform
temperatures, reducing hot and cold spots.
Kilns cool faster when properly vented. In some cases, the kiln can cool down up to
four hours faster, meaning you can empty and refill the kiln in less time.
Downdraft venting can also extend the life of the metallic parts of your kiln by removing
corrosive fumes. This means longer kiln life and reduced repair costs.
So Why Vent Your Kiln?
• Fume Removal Improves Firings
• Extend the Life of Kiln Elements
• Cool Your Kiln Faster
• Improve Temperature Uniformity
Super2 Furniture Kit
Furniture kit recommended for use with Evenheat models RM II 2929, HF 2927, DeLuxe 10 2927 and 2927.
This kit can also be used with any kiln brand and model with a minimum diameter of 28".
Furniture Kit includes:
- Eight (8) 26" Half Shelves
- Eight (8) each of 1", 2", 3", 4", 5" and 6" Posts. All posts 1-1/2" square.
- One (1) Haik Brush
- One (1) 1lb. Kiln Wash
Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.
Additional freight charges may apply on this item.
We will contact you regarding any additional charges before shipping.
Product Specifications
Warranty Information
Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.
