Product Overview
High Fire 2918 (Studio Size)
The High Fire studio size models are large and powerful enough for cone 10 daily. Sizes range from easy to load like the HF 2918 all the way up to the large volume HF 2927.
All High Fire studio size models are standard equipped with our patented Dyna-Lift lid lift system and our Swing View control enclosure. The Swing View allows the artist to swivel the controls up to a very comfortable programming and use angle.
Add to that our TAP or Icon+/Genesis touchscreen controls along with solid state relays and you have a kiln that is designed to not only be easy but to be a great performer and long-lasting.
All High Fire models operate with multi-zone control for accurate and repeatable performance.
All High Fire models are equipped with our Swing View control enclosure for "stand-up" programming as well as multiple control choices including the TAP and Genesis touchscreens. Order yours with our solid state relays and never replace a relay again.
The HF 2918 offers the ceramic artist the volume of a standard studio kiln (around 7 cubic feet) with a very easy to load 18" depth.
The HF 2918 is supplied with our Patented Dyna-Lift Lid Lift Assist and features our Multi-Zone TAP Touchscreen, Genesis Touchscreen or Rampmaster II controls.
Design details include 3" firebrick for greater firing efficiency, multi-zone TAP Touchscreen, Genesis Touchscreen or Rampmaster II controls for superior temperature distribution and our Patented Dyna-Lift lid lift assist that's easy on you and the kiln.
Order yours with our Quiet Drive Solid State output option for tight temperature control and longer element life.
- Chamber 29" Diameter x 18" Deep
- 240V, 48A, 11,520W
- 2350°F Maximum Temperature
- 350lbs shipping weight
Production for the HF 2918 is 240V.
​
We do offer to build in 200V, 208V, 220V, 230V, 380V, 400V and 415V by request.
The HF 2918 is available in 3 phase Delta and Wye (380V, 400V and 415V) designs by request.
Orton VentMaster
With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are
pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the
outside through a duct. Improved air flow in the kiln results in more uniform
temperatures, reducing hot and cold spots.
Kilns cool faster when properly vented. In some cases, the kiln can cool down up to
four hours faster, meaning you can empty and refill the kiln in less time.
Downdraft venting can also extend the life of the metallic parts of your kiln by removing
corrosive fumes. This means longer kiln life and reduced repair costs.
So Why Vent Your Kiln?
• Fume Removal Improves Firings
• Extend the Life of Kiln Elements
• Cool Your Kiln Faster
• Improve Temperature Uniformity
Super1 - Furniture Kit
Furniture kit recommended for use with Evenheat models RM II 2922 and HF 2918.
​This kit can also be used with any kiln brand and model with a minimum diameter of 28".
Furniture Kit includes:
- Four (4) 26" Half Shelves
- Eight (8) each of 1", 2", 3", 4", 5" and 6" Posts. All posts 1-1/2" square.
- One (1) Haik Brush
- One (1) 1lb. Kiln Wash
Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.
Additional freight charges may apply on this item.
We will contact you regarding any additional charges before shipping.
Product Specifications
Warranty Information
Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.
