Evenheat HF 2318- Cone 10

High Fire 2318 (Studio Size)

The High Fire studio size models are large and powerful enough for cone 10 daily. Sizes range from easy to load like the HF 2918 all the way up to the large volume HF 2927.

All High Fire studio size models are standard equipped with our patented Dyna-Lift lid lift system and our Swing View control enclosure. The Swing View allows the artist to swivel the controls up to a very comfortable programming and use angle.

Add to that our TAP or Genesis touchscreen controls along with solid state relays and you have a kiln that is designed to not only be easy but to be a great performer and long-lasting.

All High Fire models operate with multi-zone control for accurate and repeatable performance.

All High Fire models are equipped with our Swing View control enclosure for "stand-up" programming as well as multiple control choices including the TAP and Genesis touchscreens. Order yours with our solid state relays and never replace a relay again.

The HF 2318 is designed to give "Studio" size in a load-friendly, shallow depth of 18". You get all the benefits of a thick-walled, 23" diameter studio kiln in an easy to load and unload design. The HF 2318 is capable of cone 10 firing on a daily basis.

All High Fire models selected with TAP, Rampmaster or Icon+/Genesis controls are standard equipped with our Swing View pivoting control enclosure for easy use and viewing.

Design details include 3" firebrick for greater firing efficiency, easy to manage 18" depth, multi-zone TAP Touchscreen, Icon+/Genesis Touchscreen or Rampmaster II controls for superior temperature distribution and our Patented Dyna-Lift lid lift assist that's easy on you and the kiln.

Available in 200V, 208V, 220V and 230V by request

Available in 3 phase Delta and Wye (380V, 400V, 415V) by request

Operates properly on both 50Hz and 60Hz

Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.

Order yours with our Quiet Drive Solid State output option for tight temperature control and longer element life.

• Chamber 23.5" Diameter x 18" Deep
• 240V, 31A, 7440W
• 2350°F Maximum Temperature
• 240lbs shipping weight

Orton VentMaster

With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are
pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the
outside through a duct. Improved air flow in the kiln results in more uniform
temperatures, reducing hot and cold spots.
Kilns cool faster when properly vented. In some cases, the kiln can cool down up to
four hours faster, meaning you can empty and refill the kiln in less time.
Downdraft venting can also extend the life of the metallic parts of your kiln by removing
corrosive fumes. This means longer kiln life and reduced repair costs.
So Why Vent Your Kiln?
• Fume Removal Improves Firings
• Extend the Life of Kiln Elements
• Cool Your Kiln Faster
• Improve Temperature Uniformity

XL1 Furniture Kit

Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.

Full Warranty Details