Product Overview
High Fire 1413 (Personal Size)
The High Fire personal size kilns are designed to reach the outer limits of ceramic firing by reaching cone 10! (cone 8 on the model 810)
​High Fire Models are constructed of 3" firebrick that offers more insulation and ability to reach high temperature faster and easier. If your plans include firing up to cone 10 then the High Fire Series is made just for you.
​Our personal size models fit well into any small studio and are even used by larger studios for testing and one-off work.
​All High Fire models are equipped with our Swing View control enclosure for "stand-up" programming as well as multiple control choices including the TAP and Genesis touchscreens. Order yours with our solid state relays and never replace a relay again.
The HF 1413 is designed specifically for the home porcelain and china artist. The size is just perfect.
All High Fire models selected with Icon, TAP, Rampmaster or Genesis/Icon+ controls are standard equipped with our Swing View pivoting control enclosure for easy use and viewing.
The HF 1413 is constructed of 3" firebrick throughout to allow for cone 10 work with ease and greater efficiency. Available with our TAP Touchscreen, Genesis Touchscreen, Rampmaster II or Icon controls. Order yours with our Quiet Drive Solid State output option for tight temperature control and longer element life.
- Chamber 14.5" Diameter x 13.5" Deep
- 240V, 15A, 3600W
- 2350°F Maximum Temperature
- 130lbs shipping weight
Orton VentMaster
With Downdraft Venting, the kiln is kept under a slight negative pressure. Gases are
pulled out of the kiln near the bottom, mixed with fresh room air and exhausted to the
outside through a duct. Improved air flow in the kiln results in more uniform
temperatures, reducing hot and cold spots.
Kilns cool faster when properly vented. In some cases, the kiln can cool down up to
four hours faster, meaning you can empty and refill the kiln in less time.
Downdraft venting can also extend the life of the metallic parts of your kiln by removing
corrosive fumes. This means longer kiln life and reduced repair costs.
So Why Vent Your Kiln?
• Fume Removal Improves Firings
• Extend the Life of Kiln Elements
• Cool Your Kiln Faster
• Improve Temperature Uniformity
1413 Furniture Kit
Furniture kit recommended for use with Evenheat models RM II 1413, HF 1413 and 1413.
This kit can also be used with any kiln brand and model with a minimum diameter of 13.5".
Furniture Kit includes:
- One (1) 12" Half Shelf
- One (1) 12" Full Shelf
- Four (4) each of 1", 2", 3", 4", 5" and 6" Posts. All posts 1" square.
- One (1) Haik Brush
- One (1) 1lb. Kiln Wash
Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.
Additional freight charges may apply on this item.
We will contact you regarding any additional charges before shipping.
Product Specifications
Warranty Information
Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years from the date of purchase the oven will be free of defects in workmanship and materials when used under normal and proper operating conditions.